From cgshawaii at netscape.net Sat Nov 1 00:55:53 2008 From: cgshawaii at netscape.net (cgshawaii@netscape.net) Date: Sat Nov 1 00:55:21 2008 Subject: [BMWCSRegistry] Set release latch covers wanted In-Reply-To: <58862444712E4E15A376368812F589BE@mediacenter> References: <58862444712E4E15A376368812F589BE@mediacenter> Message-ID: <8CB09F541084F95-F0C-2504@WEBMAIL-MY22.sysops.aol.com> Someone was making aftermarket replacements.? BMW 2002s use them too.? Suggest you contact Carl Nelson at www.bimmerdoc.com.? If it wasn't he that supplied them, surely he'd know where to get them. Charlie -----Original Message----- From: gary.jane To: coupegroup Sent: Wed, 29 Oct 2008 1:33 pm Subject: [BMWCSRegistry] Set release latch covers wanted My seat upgrade/recover project progresses.? I have decided to get my seats recovered? (they now are tatty blue velour).? I am going to have the seats and all the back seat accessory pieces re-done in marine blue BMW vinyl - with the center sections of the seats done in the perforated/herring bone/chevron impossed vinyl that I have as insert accents in my door panels.? That will be unique, eh!? I am so lucky to live near SMS Auto Fabrics.? I visited their facility today and was awed by the vast variety of materials they have.? Surely, there is no larger such vendor in the world.? I showed my door panel insert to a warehouseman and he went right to the exact bolt of material - this in a warehouse at least 100 yds x 60 yds x 15 yds, crammed with rack upon rack of auto materials.? Amazing. ? So, now with a mental commitment to a recovering plan, I took off my ten-year-old sheepskin seat covers and discovered that sometime in the last ten years both seatback release level "covers" (the plastic chrome and black escutcheon plates surrounding the holes in the seat backs) have disintegrated - except for whatever is left of them under the screws holding them on.? I know how futile this request might be, but does anyone have these plates?? Why BMW did not execute them in chrome metal is probably a bean-counter issue.? My upholstery guy thinks he can source some suitable alternatives, but I have to exhaust?the possibility of obtaining OEM replacements! ? I have also ordered a new blue carpet set from World Upholstery.? I figured while the seats are out, I'd tackle the new carpeting.? I'll let you all know what I think of this experience in a couple weeks. ? TIA for any help. ? Gary Burke 1973 3.0 CS +2240356+ _______________________________________________ Please edit the length of replies BMWCSRegistry mailing list BMWCSRegistry@idb.ded.forest.net http://idb.ded.forest.net/mailman/listinfo/bmwcsregistry -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.bmwcsregistry.org/pipermail/bmwcsregistry/attachments/20081101/462a52ab/attachment.html From buettner at fvtc.edu Sat Nov 1 09:22:20 2008 From: buettner at fvtc.edu (Buettner, David L) Date: Sat Nov 1 09:21:54 2008 Subject: [BMWCSRegistry] New member In-Reply-To: <20081029160002.C4A6DE7780@www.bmwcsregistry.org> References: <20081029160002.C4A6DE7780@www.bmwcsregistry.org> Message-ID: <87DB3BD79212CB48B898BABFBFE9BA0A29096B5BCE@mailbox1.foxvalleytech.com> I would like to introduce the group to a good friend of mine, Jim Perry. Jim is a new coupe owner (one of my projects) and is a going to be a great participant. He will complete the project with great attention to detail and focus. He comes to us from Volvo land, where he is regarded well. He also owns a nicely restored 1800es and an Amazon, or so he calls it. I convinced him to make his next project a BMW. Art, will you see that Jim's address (james.perry@uwc.edu) is added to the distribution list? Please welcome Jim to the fold. Dave Buettner ********************************************* From CPeavey at HPTI.com Sat Nov 1 12:37:23 2008 From: CPeavey at HPTI.com (Peavey, Charlie) Date: Sat Nov 1 12:36:02 2008 Subject: [BMWCSRegistry] Set release latch covers wanted In-Reply-To: <8CB09F541084F95-F0C-2504@WEBMAIL-MY22.sysops.aol.com> References: <58862444712E4E15A376368812F589BE@mediacenter> <8CB09F541084F95-F0C-2504@WEBMAIL-MY22.sysops.aol.com> Message-ID: <5045A4D718CAB644BA24979206486B6004771330@hptimail03.HPTI.COM> If you find a source, please share the information. I have a 2002 in addition to my coupe and both cars need new ones. Charlie P ________________________________ From: bmwcsregistry-bounces@idb.ded.forest.net [mailto:bmwcsregistry-bounces@idb.ded.forest.net] On Behalf Of cgshawaii@netscape.net Sent: Saturday, November 01, 2008 12:56 AM To: res076bb@verizon.net; bmwcsregistry@idb.ded.forest.net Subject: Re: [BMWCSRegistry] Set release latch covers wanted Someone was making aftermarket replacements. BMW 2002s use them too. Suggest you contact Carl Nelson at www.bimmerdoc.com. If it wasn't he that supplied them, surely he'd know where to get them. Charlie -----Original Message----- From: gary.jane To: coupegroup Sent: Wed, 29 Oct 2008 1:33 pm Subject: [BMWCSRegistry] Set release latch covers wanted My seat upgrade/recover project progresses. I have decided to get my seats recovered (they now are tatty blue velour). I am going to have the seats and all the back seat accessory pieces re-done in marine blue BMW vinyl - with the center sections of the seats done in the perforated/herring bone/chevron impossed vinyl that I have as insert accents in my door panels. That will be unique, eh! I am so lucky to live near SMS Auto Fabrics. I visited their facility today and was awed by the vast variety of materials they have. Surely, there is no larger such vendor in the world. I showed my door panel insert to a warehouseman and he went right to the exact bolt of material - this in a warehouse at least 100 yds x 60 yds x 15 yds, crammed with rack upon rack of auto materials. Amazing. So, now with a mental commitment to a recovering plan, I took off my ten-year-old sheepskin seat covers and discovered that sometime in the last ten years both seatback release level "covers" (the plastic chrome and black escutcheon plates surrounding the holes in the seat backs) have disintegrated - except for whatever is left of them under the screws holding them on. I know how futile this request might be, but does anyone have these plates? Why BMW did not execute them in chrome metal is probably a bean-counter issue. My upholstery guy thinks he can source some suitable alternatives, but I have to exhaust the possibility of obtaining OEM replacements! I have also ordered a new blue carpet set from World Upholstery. I figured while the seats are out, I'd tackle the new carpeting. I'll let you all know what I think of this experience in a couple weeks. TIA for any help. Gary Burke 1973 3.0 CS +2240356+ _______________________________________________ Please edit the length of replies BMWCSRegistry mailing list BMWCSRegistry@idb.ded.forest.net http://idb.ded.forest.net/mailman/listinfo/bmwcsregistry ________________________________ McCain or Obama? Stay up to date on the latest from the campaign trail with AOL News . -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.bmwcsregistry.org/pipermail/bmwcsregistry/attachments/20081101/00316842/attachment.html From csilcoupe at msn.com Sat Nov 1 12:56:20 2008 From: csilcoupe at msn.com (Dan Koturov) Date: Sat Nov 1 12:55:49 2008 Subject: [BMWCSRegistry] Set release latch covers wanted In-Reply-To: <58862444712E4E15A376368812F589BE@mediacenter><8CB09F541084F95-F0C-2504@WEBMAIL-MY22.sysops.aol.com> <5045A4D718CAB644BA24979206486B6004771330@hptimail03.HPTI.COM> References: <58862444712E4E15A376368812F589BE@mediacenter><8CB09F541084F95-F0C-2504@WEBMAIL-MY22.sysops.aol.com> <5045A4D718CAB644BA24979206486B6004771330@hptimail03.HPTI.COM> Message-ID: Carl Nelson sells new die cast metal and chrome with black center reproductions, try 8004668184. Not cheap but industructable. Dan ----- Original Message ----- From: Peavey, Charlie To: bmwcsregistry@idb.ded.forest.net Sent: Saturday, November 01, 2008 10:37 AM Subject: RE: [BMWCSRegistry] Set release latch covers wanted If you find a source, please share the information. I have a 2002 in addition to my coupe and both cars need new ones. Charlie P ------------------------------------------------------------------------------ From: bmwcsregistry-bounces@idb.ded.forest.net [mailto:bmwcsregistry-bounces@idb.ded.forest.net] On Behalf Of cgshawaii@netscape.net Sent: Saturday, November 01, 2008 12:56 AM To: res076bb@verizon.net; bmwcsregistry@idb.ded.forest.net Subject: Re: [BMWCSRegistry] Set release latch covers wanted Someone was making aftermarket replacements. BMW 2002s use them too. Suggest you contact Carl Nelson at www.bimmerdoc.com. If it wasn't he that supplied them, surely he'd know where to get them. Charlie -----Original Message----- From: gary.jane To: coupegroup Sent: Wed, 29 Oct 2008 1:33 pm Subject: [BMWCSRegistry] Set release latch covers wanted My seat upgrade/recover project progresses. I have decided to get my seats recovered (they now are tatty blue velour). I am going to have the seats and all the back seat accessory pieces re-done in marine blue BMW vinyl - with the center sections of the seats done in the perforated/herring bone/chevron impossed vinyl that I have as insert accents in my door panels. That will be unique, eh! I am so lucky to live near SMS Auto Fabrics. I visited their facility today and was awed by the vast variety of materials they have. Surely, there is no larger such vendor in the world. I showed my door panel insert to a warehouseman and he went right to the exact bolt of material - this in a warehouse at least 100 yds x 60 yds x 15 yds, crammed with rack upon rack of auto materials. Amazing. So, now with a mental commitment to a recovering plan, I took off my ten-year-old sheepskin seat covers and discovered that sometime in the last ten years both seatback release level "covers" (the plastic chrome and black escutcheon plates surrounding the holes in the seat backs) have disintegrated - except for whatever is left of them under the screws holding them on. I know how futile this request might be, but does anyone have these plates? Why BMW did not execute them in chrome metal is probably a bean-counter issue. My upholstery guy thinks he can source some suitable alternatives, but I have to exhaust the possibility of obtaining OEM replacements! I have also ordered a new blue carpet set from World Upholstery. I figured while the seats are out, I'd tackle the new carpeting. I'll let you all know what I think of this experience in a couple weeks. TIA for any help. Gary Burke 1973 3.0 CS +2240356+ _______________________________________________ Please edit the length of replies BMWCSRegistry mailing list BMWCSRegistry@idb.ded.forest.net http://idb.ded.forest.net/mailman/listinfo/bmwcsregistry ------------------------------------------------------------------------------ McCain or Obama? Stay up to date on the latest from the campaign trail with AOL News. _______________________________________________ Please edit the length of replies BMWCSRegistry mailing list BMWCSRegistry@idb.ded.forest.net http://idb.ded.forest.net/mailman/listinfo/bmwcsregistry -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.bmwcsregistry.org/pipermail/bmwcsregistry/attachments/20081101/29a53783/attachment.html From res076bb at verizon.net Sat Nov 1 19:42:18 2008 From: res076bb at verizon.net (gary.jane) Date: Sat Nov 1 19:41:45 2008 Subject: [BMWCSRegistry] Set release latch covers wanted References: <58862444712E4E15A376368812F589BE@mediacenter> <8CB09F541084F95-F0C-2504@WEBMAIL-MY22.sysops.aol.com> <5045A4D718CAB644BA24979206486B6004771330@hptimail03.HPTI.COM> Message-ID: <9CAEBF29B72F48D2B6C6CE4426CFDCA9@mediacenter> OK, here's my research to date on the seat release latch covers: Carl Nelson says he has METAL equivalents at $45/ea. carl@bimmerdoc.com Walloth &Nesch has OEM PLASTIC ones for 10.00 EU/ea. http://www.wallothnesch.com/e/frameoffer.htm - E9 trim So, it's a question of how much one wishes to spend and/or how robust the latches must be for your application. Gary Burke 1973 3.0 CS +2240356+ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.bmwcsregistry.org/pipermail/bmwcsregistry/attachments/20081101/5f035665/attachment.html From the-hound at juno.com Sat Nov 1 21:25:29 2008 From: the-hound at juno.com (the-hound@juno.com) Date: Sat Nov 1 21:26:45 2008 Subject: [BMWCSRegistry] New member Message-ID: <20081101.212529.22443.0@webmail20.vgs.untd.com> Yes....... Welcome to the fold.......we can always use another expert on cars/repairs because I am not!!!!!!!! The Hound -- "Buettner, David L" wrote: I would like to introduce the group to a good friend of mine, Jim Perry. Jim is a new coupe owner (one of my projects) and is a going to be a great participant. He will complete the project with great attention to detail and focus. He comes to us from Volvo land, where he is regarded well. He also owns a nicely restored 1800es and an Amazon, or so he calls it. I convinced him to make his next project a BMW. Art, will you see that Jim's address (james.perry@uwc.edu) is added to the distribution list? Please welcome Jim to the fold. Dave Buettner ********************************************* _______________________________________________ Please edit the length of replies BMWCSRegistry mailing list BMWCSRegistry@idb.ded.forest.net http://idb.ded.forest.net/mailman/listinfo/bmwcsregistry _____________________________________________________________ Find the right teaching school to meet your educational needs. Click to learn more. http://thirdpartyoffers.juno.com/TGL2121/fc/Ioyw6i3njBiK0I5mPZ3kl26OJcIvpSXbg4rUGRPL4K0WbdxPU3gpRt/?count=1234567890 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.bmwcsregistry.org/pipermail/bmwcsregistry/attachments/20081102/6684b4bc/attachment-0001.html From CSiLA at compuserve.com Sun Nov 2 19:10:15 2008 From: CSiLA at compuserve.com (CSi) Date: Sun Nov 2 19:12:28 2008 Subject: [BMWCSRegistry] stock alloy wheel Message-ID: <200811021910_MC3-2-153C-6AF8@compuserve.com> Gary, We can sell you one of these used for $150. Shipping charges can be quoted after the wheel is packed for shipment. Regards, CSi Inc. 909-629-6869 (Tel) 909-629-6651 (Fax) -------------Forwarded Message----------------- Message: 1 Date: Tue, 28 Oct 2008 12:15:07 -0700 From: "gary.jane" Subject: [BMWCSRegistry] Stock alloy wheel To: "coupegroup" Message-ID: <68E0A2336B674A98A3FC065D44D1A09A@mediacenter> Content-Type: text/plain; charset="iso-8859-1" A friend with an E3 3.0 just had a stock CS alloy wheel "go missing" while parked at his transmission shop. Anyone have a good, single stock alloy wheel available? How much to get it to Portland, OR? TIA, Gary Burke 1973 3.0 CS +2240356+ From CSiLA at compuserve.com Sun Nov 2 19:22:11 2008 From: CSiLA at compuserve.com (CSi) Date: Sun Nov 2 19:27:29 2008 Subject: [BMWCSRegistry] seat release bezels (latch covers) Message-ID: <200811021922_MC3-2-153C-6AFD@compuserve.com> Gary, We sell these bezels, reproduced in metal, for $25 each. Regards, CSi Inc. 909-629-6869 (Tel) 909-629-6651 (Fax) -------------Forwarded Message----------------- Message: 1 Date: Wed, 29 Oct 2008 16:33:13 -0700 From: "gary.jane" Subject: [BMWCSRegistry] Set release latch covers wanted To: "coupegroup" Message-ID: <58862444712E4E15A376368812F589BE@mediacenter> Content-Type: text/plain; charset="iso-8859-1" At least ten years both seatback release level "covers" (the plastic chrome and black escutcheon plates surrounding the holes in the seat backs) disintegrated - except for whatever is left of them under the screws holding them on. I know how futile this request might be, but does anyone have these plates? TIA for any help. Gary Burke 1973 3.0 CS +2240356+ From res076bb at verizon.net Mon Nov 3 13:34:14 2008 From: res076bb at verizon.net (gary.jane) Date: Mon Nov 3 13:33:26 2008 Subject: [BMWCSRegistry] Seat release latch covers wanted Message-ID: <555B7FCB06AA4B42BC18344D16DE71D1@mediacenter> Additional source for METAL replacements: CSi, for $25/ea: CSiLA@compuserve.com Gary Burke 1973 3.0 CS +2240356+ ----- Original Message ----- From: gary.jane To: Peavey, Charlie ; bmwcsregistry@idb.ded.forest.net Sent: Saturday, November 01, 2008 3:42 PM Subject: Re: [BMWCSRegistry] Set release latch covers wanted OK, here's my research to date on the seat release latch covers: Carl Nelson says he has METAL equivalents at $45/ea. carl@bimmerdoc.com Walloth &Nesch has OEM PLASTIC ones for 10.00 EU/ea. http://www.wallothnesch.com/e/frameoffer.htm - E9 trim So, it's a question of how much one wishes to spend and/or how robust the latches must be for your application. Gary Burke 1973 3.0 CS +2240356+ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.bmwcsregistry.org/pipermail/bmwcsregistry/attachments/20081103/05dd741b/attachment.html From knowtree at aloha.com Tue Nov 4 12:31:46 2008 From: knowtree at aloha.com (knowtree@aloha.com) Date: Tue Nov 4 17:31:06 2008 Subject: [BMWCSRegistry] New member Message-ID: <200811042231.mA4MVkA5022571@yoda.pixi.com> > I would like to introduce the group to a good friend of mine, Jim Perry. [snip] > > Please welcome Jim to the fold. > > Dave Buettner Welcome to the monkey house, Jim! You are in Wisconsin? I'm in Honolulu, where we can work all winter on our cars without a heated garage. It's hard to get any work done with all the bikini-clad women who sprawl themselves across the hood. If you seek encouragement you should visit my blog, "The E9 Eating Rust Project" at . Between the condition of my car and the painfully slow progress I am sure will will feel great about your project. Gary Dunn Honolulu Open Slate Project http://openslate.net/ 73 BMW E9 (3.0 CS) 2213583 (rust repair research project) http://e9erust.blogspot.com/ From the-hound at juno.com Fri Nov 7 16:53:52 2008 From: the-hound at juno.com (the-hound@juno.com) Date: Fri Nov 7 16:54:06 2008 Subject: [BMWCSRegistry] Looking For A Used ABS Controlled Unit Part Message-ID: <20081107.165352.11443.1@webmail03.vgs.untd.com> Hello Everyone: My 1996 318 IC ABS Control Unit w/o the Auto-Tracking System needs to be replaced. My dash ABS light came on and my shop is having a problem trying to turn it off. A new one cost to much. The part # is: 34521163089 made for the: 318, 318 IT, 325 and 328 cars from the time period of August 1994 - September 1996 (without Auto Tracking). If anyone has one or know of a used unit for sale, please hit me back off-line. Also, if you have one that I can use for the shop to test "if it is the control unit or not", that would be great too. Thanks.........Baskerville...........In Washington, DC. _____________________________________________________________ Love Graphic Design? Find a school near you. Click Now. _____________________________________________________________ Love Graphic Design? Find a school near you. Click Now. http://thirdpartyoffers.juno.com/TGL2121/fc/Ioyw6i3oLKlTgSd7NL0GSd5dWFn2aeLjuDbRUgtsxlgfNiy1eKqXE0/?count=1234567890 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.bmwcsregistry.org/pipermail/bmwcsregistry/attachments/20081107/dd8c7a21/attachment.html From sebring222 at aol.com Tue Nov 18 22:53:50 2008 From: sebring222 at aol.com (sebring222@aol.com) Date: Tue Nov 18 22:52:10 2008 Subject: [BMWCSRegistry] CS Coupe Evaporative Canister Message-ID: <8CB181190FB3B93-59C-1716@WEBMAIL-MB17.sysops.aol.com> Group- Does anyone have a spare evaporative canister they might be willing to sell? Thanks for your help with this. Jim Dougherty New Orleans -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.bmwcsregistry.org/pipermail/bmwcsregistry/attachments/20081118/7e01a3a6/attachment.html From CPeavey at HPTI.com Wed Nov 19 09:56:39 2008 From: CPeavey at HPTI.com (Peavey, Charlie) Date: Wed Nov 19 09:54:02 2008 Subject: [BMWCSRegistry] CS Coupe Evaporative Canister In-Reply-To: <8CB181190FB3B93-59C-1716@WEBMAIL-MB17.sysops.aol.com> References: <8CB181190FB3B93-59C-1716@WEBMAIL-MB17.sysops.aol.com> Message-ID: <5045A4D718CAB644BA24979206486B60048087EE@hptimail03.HPTI.COM> Jim, They are still available new, and old ones may not do the job intended. I've heard that if too much fuel gets into the vapor lines at any point the carbon can be permanently de-activated. Charlie Peavey ________________________________ From: bmwcsregistry-bounces@idb.ded.forest.net [mailto:bmwcsregistry-bounces@idb.ded.forest.net] On Behalf Of sebring222@aol.com Sent: Tuesday, November 18, 2008 10:54 PM To: bmwcsregistry@idb.ded.forest.net Subject: [BMWCSRegistry] CS Coupe Evaporative Canister Group- Does anyone have a spare evaporative canister they might be willing to sell? Thanks for your help with this. Jim Dougherty New Orleans ________________________________ Instant access to the latest & most popular FREE games while you browse with the Games Toolbar - Download Now! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.bmwcsregistry.org/pipermail/bmwcsregistry/attachments/20081119/d262a02a/attachment.html From SDuval at trialgraphix.com Wed Nov 19 15:21:48 2008 From: SDuval at trialgraphix.com (SDuval@trialgraphix.com) Date: Wed Nov 19 15:20:00 2008 Subject: [BMWCSRegistry] Red Coupe in Los Angeles In-Reply-To: <5045A4D718CAB644BA24979206486B60048087EE@hptimail03.HPTI.COM> Message-ID: Fellow Coupesters, As I walked down Wilshire & Grand (I think) in downtown Los Angeles, a nice red coupe rounded the corner. I ran up to the car, gave him a thumbs up, and said I had a '73 as well. Was it someone in the group? The "3.0" badge had fallen off the trunk, leaving just "CS". Always nice to see coupes on the road, and such a rare spectacle for anyone outside California, like me in Florida. Also visited the Petersen Auto Museum which was pretty cool. Reeaaally nice facility. Scott '73 3.0CS Frances Scott Duval, Vice President, Presentation Technology Consulting TrialGraphix | Kroll Ontrack 3300 Corporate Way, Miramar, FL 33025 800-334-5403 (ext 285/506) | Fax 305-576-0188 www.trialgraphix.com | www.krollontrack.com From robert.prince at att.net Wed Nov 19 17:24:08 2008 From: robert.prince at att.net (robert.prince@att.net) Date: Wed Nov 19 17:22:18 2008 Subject: [BMWCSRegistry] 1966 200CS coupe Message-ID: <111920082224.13691.49249208000B35D70000357B22243651029B0A02D29B9B0EBF0A0C02079D9FD29B9D0A0D019D@att.net> Greetings, I am in the process of restoring my white 2000CS coupe. Unfortunately my radiator which was out at a shop for cleaning disappeared when the shop went out of business so need another radiator. Also, I want to recreate the decal on the radiator support sheetmetal just ahead of the battery location. The decal is mostly intact but some letters are illegible. As best I can tell it reads as follows: Batterie vor Nach laden abkl... Ni... beilaufende Motor do...emmen. I would aappreciate any assistance with the above. Thanks, Bob Prince From dklynsmith at eircom.net Wed Nov 19 18:38:19 2008 From: dklynsmith at eircom.net (Dick Klynsmith) Date: Wed Nov 19 18:35:38 2008 Subject: [BMWCSRegistry] 1966 200CS coupe In-Reply-To: <111920082224.13691.49249208000B35D70000357B22243651029B0A02D29B9B0EBF0A0C02079D9FD29B9D0A0D019D@att.net> References: <111920082224.13691.49249208000B35D70000357B22243651029B0A02D29B9B0EBF0A0C02079D9FD29B9D0A0D019D@att.net> Message-ID: <21C8D0E384F84DD9AB193FBD66864EA5@DickKlynsmitPC> Batterie vor Nachladen abklemmen. Nicht bei laufendem Motor abklemmen __________________________________ Before Charging the Battery always disconnect the battery ground cable. Disconnect only while the Engine is off. ----- Original Message ----- From: To: Sent: Wednesday, November 19, 2008 10:24 PM Subject: [BMWCSRegistry] 1966 200CS coupe > Greetings, > I am in the process of restoring my white 2000CS coupe. Unfortunately my > radiator which was out at a shop for cleaning disappeared when the shop > went out of business so need another radiator. > Also, I want to recreate the decal on the radiator support sheetmetal just > ahead of the battery location. The decal is mostly intact but some letters > are illegible. As best I can tell it reads as follows: > Batterie > vor Nach laden abkl... > Ni... beilaufende Motor > do...emmen. > I would aappreciate any assistance with the above. > Thanks, > Bob Prince > > _______________________________________________ > Please edit the length of replies > BMWCSRegistry mailing list > BMWCSRegistry@idb.ded.forest.net > http://idb.ded.forest.net/mailman/listinfo/bmwcsregistry > From dklynsmith at eircom.net Wed Nov 19 18:48:37 2008 From: dklynsmith at eircom.net (Dick Klynsmith) Date: Wed Nov 19 18:45:55 2008 Subject: [BMWCSRegistry] 1966 200CS coupe In-Reply-To: <111920082224.13691.49249208000B35D70000357B22243651029B0A02D29B9B0EBF0A0C02079D9FD29B9D0A0D019D@att.net> References: <111920082224.13691.49249208000B35D70000357B22243651029B0A02D29B9B0EBF0A0C02079D9FD29B9D0A0D019D@att.net> Message-ID: <63A270F4EE4F4C78A0BAA57FE326F760@DickKlynsmitPC> There's a guy in Germany who reproduces all the stickers for E9's ,sells them on Ebay UK,English spelling is a bit off, but I assume that sticker was common to what I posted, as the others that I got new matched the originals I had exactlysticker is reversed out so letters are white on a black background, in the shape I 've shown. size is 3 3/4"x 1 3/4" I have all the stickers for the E9. Barry Wahl in South Africa has a mint 2000CS that he rebuilt from scrap that is totally original,any further questions and I'll put you in touch. all the best Dax ----- Original Message ----- From: To: Sent: Wednesday, November 19, 2008 10:24 PM Subject: [BMWCSRegistry] 1966 200CS coupe > Greetings, > I am in the process of restoring my white 2000CS coupe. Unfortunately my > radiator which was out at a shop for cleaning disappeared when the shop > went out of business so need another radiator. > Also, I want to recreate the decal on the radiator support sheetmetal just > ahead of the battery location. The decal is mostly intact but some letters > are illegible. As best I can tell it reads as follows: > Batterie > vor Nach laden abkl... > Ni... beilaufende Motor > do...emmen. > I would aappreciate any assistance with the above. > Thanks, > Bob Prince > > _______________________________________________ > Please edit the length of replies > BMWCSRegistry mailing list > BMWCSRegistry@idb.ded.forest.net > http://idb.ded.forest.net/mailman/listinfo/bmwcsregistry > From PHEMISG at tc.gc.ca Thu Nov 20 12:18:44 2008 From: PHEMISG at tc.gc.ca (Phemister, George) Date: Thu Nov 20 12:19:44 2008 Subject: [BMWCSRegistry] 2000CS rad In-Reply-To: <20081120170008.B5E56F273C@www.bmwcsregistry.org> Message-ID: 2002 or with minor mods, E21 320 rad fit. George From PHEMISG at tc.gc.ca Thu Nov 20 13:52:00 2008 From: PHEMISG at tc.gc.ca (Phemister, George) Date: Thu Nov 20 13:53:26 2008 Subject: [BMWCSRegistry] 2000CS rad References: <20081120170008.B5E56F273C@www.bmwcsregistry.org> Message-ID: You might try Carl Nelson at La Jolla Independent in San Diego 1.800.466.8184 for a rebuilt rad and perhaps the labels. George -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/ms-tnef Size: 2895 bytes Desc: not available Url : http://www.bmwcsregistry.org/pipermail/bmwcsregistry/attachments/20081120/217074fb/attachment.bin From CSiLA at compuserve.com Sun Nov 23 01:59:09 2008 From: CSiLA at compuserve.com (CSi) Date: Sun Nov 23 01:59:49 2008 Subject: [BMWCSRegistry] 2000CS radiator, stickers Message-ID: <200811230159_MC3-2-6F4-F2A0@compuserve.com> We have good used 2000CS radiators in stock, from the many 2000CSs we have parted-out. We could also have one refurbished for you if you prefer to buy it that way. Let us know how you prefer to get it, and we'll quote you. We sell the battery stickers you're looking for too, as well as most of the other stickers under the hood of both the CS and '02. Regards, Ben Miller CSi Inc. 909-629-6869 (Tel) 909-629-6651 (Fax) ----- Original Message ----- From: To: Sent: Wednesday, November 19, 2008 10:24 PM Subject: [BMWCSRegistry] 1966 200CS coupe > Greetings, > I am in the process of restoring my white 2000CS coupe. Unfortunately my > radiator which was out at a shop for cleaning disappeared when the shop > went out of business so need another radiator. > Also, I want to recreate the decal on the radiator support sheetmetal just > ahead of the battery location. The decal is mostly intact but some letters > are illegible. > I would appreciate any assistance with the above. > Thanks, > Bob Prince > From bmwbits at bellsouth.net Sat Nov 29 21:24:59 2008 From: bmwbits at bellsouth.net (Bill Proud) Date: Sat Nov 29 21:25:00 2008 Subject: [BMWCSRegistry] CSL Model kit Message-ID: RARE bird !! http://cgi.ebay.com/Entex-1-20-BMW-3-5-CSL-race-model-car-kit-RARE-old-MINT_W0QQitemZ300275090720QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item300275090720&_trksid=p3286.c0.m14&_trkparms=72%3A1205%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318 Beepee -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.bmwcsregistry.org/pipermail/bmwcsregistry/attachments/20081129/a7930dc2/attachment.html